Yamaha DME64N Owner's Manual page 284

Chapter 4 Designer
Analyze (Configuration Analysis)
When you click the [Analyze] command on the [Tools] menu or the [Analyze] button on the toolbar, the
"Analyze" dialog box is displayed. The wire connections in the currently active configuration window
are analyzed, and the results are displayed in the "Analyze" dialog box.
Because this function allows you to make sure there are no problems with component arrangement
and wires without connecting to the DME unit, it is useful for eliminating complier errors before
executing Synchronization.
NOTE
The [Analyze] command on the [Tools] menu can be selected only when a configuration window is active.
Message Box
Displays the progress of the analysis operation. When the analysis finishes, the results are
displayed.
If errors are detected during analysis, they will display as shown below.
[Close] Button
Closes the dialog box.
284 DME Designer Owner's Manual