Yamaha DME64N Owner's Manual page 18

Chapter 1 Before Using
3
Enter the password into the [Password] box.
Enter the password set for the user.
If no password has been set, leave the password box blank when you log on.
4
Click the [OK] button.
DME Designer starts up.
When Automatic Logon Has Been Set
If automatic logon has been set, the "Log On" dialog box will not be displayed. The user set for
automatic logon will be logged on.
With automatic log on, even if a password is set for a user, it will not be requested during log on.
This is useful when logging on a specific user.
Starting by Opening a Project File
DME Designer starts when a project file with a saved configuration is opened. When the project file
is opened, DME Designer is started with the window configuration that was in place when the file
was last saved.
18 DME Designer Owner's Manual
(page 26)