Yamaha DME64N Owner's Manual page 406

Chapter 6 Component Guide
One Input to All Outputs
When you click the input channel number on the left side of matrix, the [Delay Matrix - One Input to
All Outputs] editor window opens. One input channel and all output channels are displayed. The
input channel is the one you have clicked on in the delay mixer component editor.
1
2
3
4
5
6
7
8
9
)
!
@
Input Channel Switching
The [Delay Matrix - One Input to All Outputs] editor window displays the input channel for the
channel number clicked on in the delay matrix component editor.
The [Channel] buttons in the [Input] section of the [Delay Matrix - All Inputs to One Output] editor
window switch the channel group that is displayed in the window.
406 DME Designer Owner's Manual
1
6
2
3
7
4
8
5
Section Parameter
Input Channel
Phase
Level
Solo
On
Bus Send Level Delay
Level
On
Block On
Off
Nominal
Minimum
Setting Range
-- Displays the selected input channel. Select another
channel from a menu.
ON/OFF Reverses the phase of the input signal.
- to +10 dB Sets the input signal level.
ON/OFF Turns solo ON. If Solo is engaged for even one
channel, all non-Solo channels will be muted.
ON/OFF Turns input ON.
0 to 500 ms Sets the delay time for each output channel.
- to +10 dB Sets the signal level for each output channel.
ON/OFF Turns ON the output for each output channel.
-- Turns ON all channel outputs. When turned ON, the
[On] button lights up.
-- Turns OFF all channel outputs.
-- Resets all output signal levels, making them 0 dB.
-- Resets all output signal levels, making them - dB.
9
)
!
@
Function