Files Used By The Dme Designer - Yamaha DME64N Owner's Manual

Files Used by the DME DESIGNER

The following files are used by the DME designer application.
Name
Project File
DME Data File
Library File
Wave List File
DME Backup File
Project Files
Systems built with DME Designer are saved as project files. Project files have ".daf" as the extension
for their filenames.
These files include settings for the area, zones, device groups, configurations, and each parameter.
Since only one project file can be open at a time, before you can open a second file, the first one must
be closed.
The commands for opening project files, creating new ones, and saving them, are found in the [File]
menu of the Main Panel window.
Creating New Project Files
Project files are created using the [File] menu
1
Click [File] menu
Since the currently open project file must be closed before a new one can be created, a "Project
file has been modified. Save?" dialog box will be displayed.
2
To save the file, click [Yes]. the File Save dialog box will be displayed.
If you click [Yes], the File Save dialog box will be displayed.
A new project file will be created.
Description
Stores information relating to the entire project.
Stores information for independent DME or SP2060 units.
Stores component parameters.
Stores user control parameters.
Stores user module parameters.
Stores user modules.
Stores SP2060 libraries.
Stores the Wave File Manager list.
Stores DME or SP2060 backup data to a file.
[New] command in the Main Panel window.
[New] in the Main Panel window.
Chapter 2 DME Designer Overview
Extension
.daf
.ddf
.cel
.ucl
.uml
.umf
.llf
.dwl
.dbk
DME Designer Owner's Manual 27