Yamaha DME64N Owner's Manual page 286

Chapter 4 Designer
Creating User Modules
When you place a blank user module in the Configuration window, a new user module is created.
1
Make the Configuration window active.
2
Click the [+] next to [User Module] in the Toolkit window.
The items in the level below the [User Module] folder will be displayed.
3
Drag the [Blank User Module] to the Configuration window.
When you release the mouse button at the location where you will place the user module, the "User
Module Properties" dialog box is displayed.
4
Here you can set object properties.
[Inputs/Outputs Sets] is set to 1. Set the required number of ports.
5
Click the [OK] button.
A user module will be created, and placed in the Configuration Design window.
The user module properties can also be changed later. For information about the "User Module
Properties" dialog box, see "User Module" on
286 DME Designer Owner's Manual
page 216.