Yamaha DME Designer Owner's Manual page 376

Chapter 6 Component Guide
Crosspoint
If you click a level meter in the matrix mixer component editor, the output crosspoint window for the
group will be displayed. Turns the input channels ON and OFF and sets their levels. Just like the
matrix mixture component editor, the input channels are arranged vertically while the output
channels are arranged horizontally.
1
2
3
4
5
6
7
8
376 DME Designer Owner's Manual
[Matrix Mixer - Crosspoint] editor window
[Matrix Mixer - Crosspoint] G f B ^ [ E B h E
2
3
4
1
Section Parameter
Input Channel
Output Channel
Bus Send Level Level
On
Block On
Off
Nominal
Minimum
Setting Range
-- Switches to another channel group.
-- Switches to another channel group.
- to +10 dB Sets the output signal level for each crosspoint.
ON/OFF Turns ON output for each crosspoint.
-- Turns ON output for all channels in the Crosspoint
window. When turned ON, the [On] button lights up.
-- Turns OFF output for all channels in the Crosspoint
window.
-- Resets all output signal levels in the Crosspoint
window, making them 0 dB.
-- Resets all output signal levels in the Crosspoint
window, making them - dB.
5
6
7
8
Function