Yamaha DME Designer Owner's Manual page 323

Delay
When you click the [Delay] button for the crossover processor, it opens the delay editor window.
Here you can set the delay for each frequency band.
Parameter
1
Delay ms: 0 to 500
Sample: the range
depends on the Fs value.
Meter: 0 to 171.8
Feet: 0 to 563.6
Frame: the range depends
on the Frame value.
Beat: the range depends
on the Beat value.
2
Level - to ±0 dB
3
On ON/OFF
4
Mute ON/OFF
5
Delay Scale ms
Sample
Meter
Feet
Frame
Beat
[Crossover Processor - Delay] editor window
1
2
3
4
Setting Range
Sets the delay time.
Sets the output signal level for each channel
Turns delay ON.
Mutes the signal for each frequency band.
Selects the units for setting the delay time. The
selected button will light up, and the units in the [Delay]
edit box will change.
If [Beat] is selected, use the knob to set the BPM
(beats/minute).
Chapter 6 Component Guide
5
Function
DME Designer Owner's Manual 323