9
IP Address Selection
The DMEs included in the current zone are displayed in the [Designer] list in the
"Synchronization" dialog box. Click the [IP Address] box, then select the DME unit IP address
that matches the DME currently in the DME Designer.
NOTE
IP addresses are displayed for devices of the same type in the area.
10
Going Online.
Clicking the [Go On-Line] button displays a dialog box where you can decide the synchronization
method.
Click the [Designer DME] direction button.
Transfer of the configuration will begin, and DME Designer will be synchronized with the unit.
If there are many zones, this process may take time.
Chapter 2 DME Designer Overview
DME Designer Owner's Manual
37