Yamaha DME Designer Owner's Manual page 326

Chapter 6 Component Guide
Crossover Processor II
The following five types of components are available in the Crossover Processor II group: 2 Way, 3
Way, 4 Way, 5 Way, and 6 Way. Crossover processor II components have a single input and 2 to 6
outputs.
Double-click a component to display the component editor for it. The number of bands may vary
depending on the component, but they share a common configuration in the component editor.
There are input and output level meters in the upper part of the window. If you click the [Crossover],
[Delay], [PEQ], or [Compressor] button in the [Navigator] section, an editor for the crossover, delay,
parametric equalizer, or compressor will be displayed in a separate window. A separate component
editor will open for each output channel (such as Low or Mid) when you click on the delay, parametric
equalizer, or compressor.
1
2
3
4
5
6
326 DME Designer Owner's Manual
Crossover Processor II
1
3
4
7
Name
Input Meter
Output Meter
Section Parameter
Input Gain
Mute
Output Gain
Mute
8 9 5 6
Displays the input signal level.
Displays the output signal level.
Setting Range
- to +10 dB Sets the input signal level.
ON/OFF Mutes the input signal.
- to +10 dB Sets the output signal level for each
frequency band.
ON/OFF Mutes the output signal for each frequency
band.
2
)
Function
Function