Yamaha DME Designer Owner's Manual page 361

Section Parameter
1
Input Channels Phase
2
Gate Indicator
3
Threshold
4
Hold
5
Input Channels Decay
6
Solo
7
On
8
Fader
9
Master Output Gain Correct
)
On
!
Master
Setting Range
ON/OFF
--
-54 dB to ±0 dB
44.1 kHz: 110 m to 2.13 s
48 kHz: 101 m to 1.96 s
88.2 kHz: 55.1 m to 1.06 s
96 kHz: 50. 6m to 981 m
44.1 kHz: 110 m to 46 s
48 kHz: 101 m to 42.3 s
88.2 kHz: 55 m to 23 s
96 kHz: 51 m to 21.1 s
ON/OFF
ON/OFF
- to +10 dB
ON/OFF
ON/OFF
- to +10 dB
Chapter 6 Component Guide
Function
Reverses the phase of each channel's
input signal.
When the gate is open, the light turns
green. When the gate is closed, the light
turns yellow.
Sets the threshold value for each gate.
Sets the gate hold time.
The setting range may vary, depending
on the operating frequency.
Sets the speed for closing the gate.
The setting range may vary, depending
on the operating frequency.
Turns solo ON.
Turns ON each channel's input.
Sets the input signal level for each
channel.
Turns ON gain correction.
Turns ON each channel's output.
Sets the output signal level.
DME Designer Owner's Manual 361