Memory Test Error Codes - HP 1850R - ProLiant - 128 MB RAM Troubleshooting Manual

Table B-2: Primary Processor Test Error Codes
Error Code Description
122-XX Multiprocessor Dispatch
test failed
123-XX Interprocessor
Communication test failed
199-XX Installed devices test
failed

200-299, Memory Test Error Codes

The 200 series of diagnostic error codes identifies failures with the memory
subsystem. Corrective action may require replacement of the memory expansion
board, the memory modules, or the processor assembly.
Table B-3: Memory Test Error Codes
Error Code Description
200-XX Invalid memory
configuration
201-XX Memory machine ID test
failed
202-XX Memory system ROM
checksum failed
HP Servers Troubleshooting Guide
continued
Recommended Action
The following steps apply to error codes 122-XX and
123-XX:
1. Check the system configuration and retest.
2. Replace the processor and retest.
3. Replace the system board and retest.
1. Check the system configuration and retest.
2. Check cable connections and retest.
3. Check switch settings, jumper settings, or both,
and then retest.
4. Run the server setup utility and retest.
5. Replace the processor and retest.
6. Replace the system board and retest.
Recommended Action
Reinsert memory modules in correct location and
retest.
The following steps apply to error codes 201-XX and
202-XX:
1. Replace the system ROM and retest.
2. Replace the processor and retest.
3. Replace the memory expansion board and retest.
Test Error Codes
continued
B-3