D-Link NetDefend DFL-CP310 User Manual page 212

Viewing Computers
• Authenticated. The computer i
• Not Authenticated. The computer is not logged on to My HotSpot.
• Excluded from HotSpot. The computer is in an IP address range excluded
from HotSpot enforcement. To enforce HotSpot, you must edit the
network object. See Adding and Editing Network Objects
Note: Computers that did not communicate through the firewall are not counted for
node limit purposes, even th
Note: To increase the nu mber of computers allowed by your license, you can
upgrade your product. For further information, see Upgrading Your Software
Product on page 379.
Next to each computer, an Add button enables you to add a network obje
the computer, or an Edit button enables y
for the computer. For information on add
Adding and Editin
2. To refresh the disp
3. To view node limit information, do the following:
a. Click Node Limit.
The Node Limit wind
number of nodes used.
b. Click Close to close the window.
196
s logged on to My HotSpot.
ough they are protected by the firewall.
g Network Objects on page 130.
lay, click Refresh.
ow appears with installed software product and the
ou to edit an existing network o
ing and editing network objects, see
D-Link NetDefend firewall User Guide
on page 130.
ct for
bject