D-Link NetDefend DFL-CP310 User Manual page 386

Using RADIUS Authentication
A confirmation message appears.
) Click OK.
b
The RADIUS settings are reset to their defaults. For information on the
default values, refer to the table below.
5. To use the RADIUS VSA to assign permissions to users, configure the VSA.
See Configuring the RADIUS Vendor-Specific Attribute on page 372.
Table 76: RADIUS Page Fields
In this field...
Primary/Secondary
RADIUS Server
Address
Port
S hared Secret
370
Do this...
Configure the primary and secondary RADIUS servers.
By default, the NetDefend firewall sends a request to the primary
RADIUS server first. If the primary RADIUS server does not respond
after three attempts, the NetDefend firewall will send the request to the
secondary RADIUS server.
Type the IP a ddress of the computer that will run the RADIUS service
(one of your network computers) or click the corresponding This
Computer button to allow your computer to host the service.
To clear the text box, click Clear.
Type the port number on the RADIUS server's host computer.
The default port number is 1812.
Type the shared secret to use for secure communication with the
RADIUS server.
D-Link NetDefend firewall User Guide