D-Link NetDefend DFL-CP310 User Manual page 95

In this field...
Default Gateway
Name Servers
O btain Domain
N ame Servers
auto matically
Obt ain WINS
Ser ver
auto matically
Primary DNS
Server
S econdary DNS
Server
WINS Server
QoS
Shape Upstream:
Link Rate
Chapter 4: Configuring the Internet Connection
Do this...
Type the IP address of your ISP's default gateway.
Clear this option if you want the NetDefend firewall to obtain an IP
address automatically using DHCP, but not to automatically configure
DNS servers.
Clear this option if you want the NetDefend firewall to obtain
address automatically using DHCP, but not to automatically
WINS server.
Type the Primary DNS server IP address.
Type the Secondary DNS server IP address.
Type the WINS server IP address.
Select this option to enable Traffic Shaper for outgoing traffic. Then type
a rate (in kilobits/second) slightly lower than your Internet connection's
maximum measured upstream speed in the field provided.
It is recommended to try different rates in order to determine which one
provides the best results.
For information on using Traffic Shaper, see Using Traffic Shaper on
page 151.
Using Internet Setup
an IP
configure the
79