D-Link NetDefend DFL-CP310 User Manual page 185

In this field... Do this...
Operation Mode Select an operation mode:
•
•
•
•
•
Each operation mode indi
Super), followed by the maximum bandwidth (such as 108 Mbps).
The list of modes is dependent on the
You can prevent older wireless stations from slowing down your network,
choosing an operation mode that restricts access to newer wireless
stations.
Note: The actual data transfer speed i
maximum theoretical bandwidth and d
Important: The station wireless cards must support the selected operation
mode. For a list of cards supporting 802.11g Super, refer to
http://www.super-ag.com.
Chapter 7: Configuring a Wireless Network
802.11b (11Mbps). Operates in the 2.4 GHz range and offers a
maximum theoretical rate of 11 Mbps. When using this mode,
only 802.11b stations will be able to connect.
802.11g (54 Mbps). Operates in the 2.4 GHz range, and offers a
maximum theoretical rate of 54 Mbps. When using this mode,
only 802.11g stations will be able to connect.
802.11b/g (11/54 Mbps). Operates in the 2.4 GHz range, and offers
a maximum theoretical rate of 54 Mbps. When using this mode,
both 802.11b stations and 802.11g stations will be able to
connect.
802.11g Super (108 Mbps). Operates in the 2.4 GHz range, and
offers a maximum theoretical rate of 108 Mbps. When using this
mode, only 802.11g Super stations will be able to connect.
802.11g Super (11/54/108). Operates in the 2.4 GHz range, and
offers a maximum theoretical rate of 108 Mbps. When using this
mode, 802.11b stations, 802.11g stations, and 802.11g Super
stations will all be able to connect.
cates a wireless protocol (such as 802.11g
Manually Configuring a WLAN
selected country.
s usually significantly lower than the
egrades with distance.
by
169