Table of Contents
Advertisement
Configuring VStream Antivirus
Table 60: VStream Rule Fields
In this field...
Do this...
Any Serv
ice
Click this option to specify that the rule should apply to a
Standard
Click this option to specify that the rule should apply to a spe
Service
service.
You must then select the desired service from the dr
Custo
m Service
Click this option to specify that the rule should apply to a specific non-
standard service.
The Protocol and Port Range fie
Proto
col
Select the protocol (TCP, UDP, or ANY) for which the rule shou
Ports
To specify the port range to which the rule applies, type the start port
number in the left text box, and the end port number in the right text box.
Note: If y
enter only one port number, the range will include only that port.
If the
Select the source of the connections you want to allow/block.
connection
To specify an IP address, select Specified IP and type the desired IP address
source is
in the filed provided.
To specify an IP address range, select Specified Range and type the desired
IP address range in the fields provided.
272
lds are enabled. You must fill them in.
ou do not enter a port range, the rule will apply to all ports. If you
ny service.
cific tandard
s
op-d wn list.
o
ld apply.
D-Link NetDefend firewall User Guide
Advertisement
Chapters
Table of Contents
Troubleshooting
