Yamaha DM1000 Owner's Manual page 304

304
Appendix A: Parameter Lists
REV+SYMPHO.
One input, two output reverb and symphonic effects in parallel.
Parameter
REV TIME
INI. DLY
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV/SYM
FREQ.
DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
REV->SYMPHO.
One input, two output reverb and symphonic effects in series.
Parameter
REV TIME
INI. DLY
HI. RATIO
DIFF.
DENSITY
HPF
LPF
REV.BAL
FREQ.
DEPTH
MOD. DLY
WAVE
SYNC
NOTE
1.
DM1000—Owner's Manual
Range
0.3–99.0 s Reverb time
0.0–500.0 ms Initial delay before reverb begins
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
Reverb and symphonic balance (0% = all reverb, 100% = all
0–100%
symphonic)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF, ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Range
0.3–99.0 s Reverb time
0.0–500.0 ms Initial delay before reverb begins
0.1–1.0 High-frequency reverb time ratio
0–10 Spread
0–100% Reverb density
THRU, 21.2 Hz–8.00 kHz High-pass filter cutoff frequency
50.0 Hz–16.0 kHz, THRU Low-pass filter cutoff frequency
Reverb and symphonic reverb balance (0% = all symphonic
0–100%
reverb, 100% = all reverb)
0.05–40.00 Hz Modulation speed
0–100% Modulation depth
0.0–500.0 ms Modulation delay time
Sine, Tri Modulation waveform
OFF, ON Tempo parameter sync on/off
1
Used in conjunction with TEMPO to determine FREQ.
Description
Description