Yamaha DM1000 Owner's Manual page 137

Setting the Monitoring Level of the Sound System
1 Adjust the monitoring levels using the MONITOR [MONITOR LEVEL] control.
All channel monitoring levels change simultaneously.
2 Press the MONITOR [DISPLAY] button repeatedly until the Monitor | Sur-
round page appears.
This page enables you to solo or mute monitoring channels, store the [MONITOR LEVEL]
control setting, and select the monitoring source.
1
A
MUTE/SOLO section
This section enables you to mute or solo Surround Monitor Channels for each Bus.
• SOLO .............................This button turns the Surround Monitor Solo function on or
• buttons .................These buttons mute or unmute the speakers. The meters con-
B
SETTING section
• SLOT 1 & 2 ........................................... These buttons determine which Slot Inputs are
• C-R TO MONITOR L/R..................... When this button is turned on, the Left and Right
C
STATUS section
This section enables you to set the output levels of the currently-selected Surround
Monitors.
• SURROUND MODE ...This parameter displays the current Surround mode.
• MONITOR LEVEL.......This parameter indicates the current Surround Monitor level.
• SET SPL85.....................This button enables you to calibrate the volume setting of the
off. When this button is turned on, you can select speaker icons
( ) to solo certain Buses.
nected to the speaker icons indicate the signal level of the cor-
responding Buses.
monitored through the Surround Monitor when
you press the [SLOT] button. Turning on both
buttons 1 and 2 mixes the two slot signals.
Surround Monitor Channels are fed to the Con-
trol Room Monitors.
[MONITOR LEVEL] control to 85 dB SPL, the cinema stan-
dard for setting up Surround Channel Monitor speakers, and
then store the value.
Surround Monitoring
2
3
DM1000—Owner's Manual
137
11