Nuendo Remote Layer; Other Daw Remote Layers - Yamaha DM1000 Owner's Manual

224
Chapter 17—Remote Control

Nuendo Remote Layer

You can remotely control Nuendo using Remote Layers 1 and 2.
■ Configuring Computers
1 Connect the DM1000 to your computer using a USB cable, and install the
required USB driver included on the DM1000 CD-ROM.
Refer to the Studio Manager installation guide for more information on installing the
driver.
2 Launch Nuendo, select the Device Setup menu, and set up Nuendo so that
the DM1000 can communicate with the software.
Refer to the Nuendo User's Manual for more information on setting up the software.
■ Configuring the DM1000
1 Refer to page 208 to configure the Setup | MIDI/HOST page.
2 Press the LAYER [REMOTE 1] or [REMOTE 2] button to set the TARGET param-
eter to Nuendo.
You can now remotely control Nuendo using the selected Remote Layer.

Other DAW Remote Layers

You can remotely control DAW software that supports the Pro Tools protocol.
■ Configuring Computers
1 Connect the DM1000 to your computer using a USB cable, and install the
required USB driver included on the DM1000 CD-ROM.
Refer to the Studio Manager installation guide for more information on installing the
driver.
2 Launch and set up DAW software so that the DM1000 communicates with
the software.
Refer to the DAW software's user's manual for more information on setting up the software.
■ Configuring the DM1000
1 Refer to page 208 to configure the Setup | MIDI/HOST page.
2 Press the LAYER [REMOTE 1] or [REMOTE 2] button to set the TARGET param-
eter to General DAW.
You can now remotely control DAW software using the selected Remote Layer.
DM1000—Owner's Manual