Pushing Or Towing The Machine Forward - Toro Reelmaster 7000-D Operator's Manual

Pushing or Towing the Machine Forward

1. Open the hood and remove the center shroud.
2. Open the tow-bypass valve
Note:
3. Push or tow the machine forward.
Do not push or tow the machine faster than 3 to 4.8 km/h (2 to 3 mph) or for more than
0.4 km (1/4 mile), because damage to the hydraulic system may occur. The bypass
valve must be open whenever you push or tow the machine.
4. When the machine is ready for operation, close the tow-bypass valve by rotating it back
90° (1/4 turn) before starting the engine.
Note:
3466-702A
Note the position of the valve when opening and closing it.
Do not exceed 7 to 11 N∙m (5 to 8 ft-lb) torque to close the valve.
by rotating it 90° (1/4 turn) in either direction.
G424062
IMPORTANT
Page 5–37 Operation: Pushing or Towing the Machine