Checking The Parking Brake And Traction Pedal Run-Interlock - Toro Reelmaster 7000-D Operator's Manual

Checking the Interlock Switches (continued)
Preparing the Machine
1. Drive the machine slowly to an open area.
2. Lower the cutting units, shut off the engine, and engage the parking brake.
Checking the Traction Pedal Start-Interlock
1. Sit in the operator's seat and engage the parking brake.
2. Press the PTO switch to the D
3. Press the traction pedal and rotate the key to the S
Note:
The engine should not start with the traction pedal pressed.
Checking the PTO-Start Interlock
1. Sit in the operator's seat.
2. Press the PTO switch to the E
3. Rotate the key to the S
Note:
The engine should not start with the PTO switch in the E
Checking the PTO-Run Interlock
1. Sit in the operator's seat and press the PTO switch to the D
2. Start the engine and rise from the seat.
3. Press the PTO switch to the E
Note:
Checking the Parking Brake and Traction Pedal Run-
Interlock
1. Sit in the operator's seat and engage the parking brake.
2. Press the PTO switch to the D
3. Start the engine.
4. Press the traction pedal.
Note:
pedal is pressed.
Operation: Before Operation
position.
TART
The PTO should not run when you are out of the operator's seat.
The engine should shut off when the parking brake is engaged and the traction
position.
ISENGAGE
TART
position.
NGAGE
position.
NGAGE
position.
ISENGAGE
Page 5–4
position.
position.
NGAGE
position.
ISENGAGE
3466-702 A