Miele H 814 Operating Instructions Manual page 46

Installation - Ceramic hob
(Thiese hobs are classified In Qefmany
as "V' class for heal protection).
Tt>ey must be positioned so that there
is adequate ventilation There may be
a wall at the rear and wal or tal units
at one side. On the other side howev¬
er. no unit or divider rnust stand higher
than the hob.
There must be a minimum distartce
of 30 mm between the hob untt end
adjacent furniture (e.g. tal unit)
because of the heat radiated from
the hob.
KM 121, KM 124, KM 125, KM 131,
KM 132, KM 133, KM 134, KM 141
Prepare the worktop cut-out as shown
in U^e illustratione bekw.
KM 131. KM 132
<KM vrth plate warming area)
' an to m caM
KM 1t^ KM 134
(KM with plate warming area)
I •awtttotigntoc—_
KM 128, KM 129
The lempiale provided with the hob
must be used when cutting out the
worktop, (cut-out with rounded edges).
46