Table of Contents
Advertisement
-12-
26
Switching the Images
'After you select the signals forthe LINE A and LINE B.
Jmages, you switch the images manually moving the
'switching
ever up and down,
'When you want o switch the images in automatic mode, see
page 27.
Make sure that the AUTO button Is not lt. If
itis, press AUTO
to turn it off.
switch the Images.
'As you move the switching lever, the images
'switches from LINE A to LINE B or trom LINE B to
UNE A,
'To switch the images slowly, move the switching
lever slowly
To switch the images quickly, move the switching
lever quickly.
2 Move the switching lever when you want to
[a] The indicator lights up showing how far the
'switching ofthe images has proceeded
seanune
In this chapter, we explain:
+ how to switch the images in automatic mode
+ how to select an audio signal
+ how to generate a digital effect
+ how to adjust the the video picture and audio volume
* how to store and use the effect program in memory
* about controlling the digital SEG from editing controller
* about the other functions available with the OPTION button.
'Once you set the digital SEG in automatic mode, you only
'eed to press the START button to switch the images.
—-
Press AUTO to turn it on.
'The digital SEG enters automatic mode.
88888 8888
te
speed.
"#7 to make the switching speed fast.
" = " to make the switching
speed slow.
2 Press + or - to set the switching
{al The indicator lights up showing the speed level
you set.
Press START when you want to switch
the images.
'The image switches from one to another with
the effect you selected,
'switching ofthe images has proceeded,
it (0) The inca thts up showing how far the
Note on the SPEED/POSITION indicator
'When you set the switching speed, the indicator shows the
'speed level. When you switch the images, it shows the
image position.
vag
Advertisement
Table of Contents
