(On the intial condition
"The illustration below shows the buttons which are fit up in
the initial condition,
' + The LINE A image is the signal input tothe INPUT 1 jacks.
(To select the signal, see page 16.)
' + The LINE 8 image is the signal input tothe INPUT 2 jacks.
' + Switch the images while overlapping, (To select the
'switching efect, see page 18. To select the audio signal,
see page 23.)
' + Switch the images in manual mode. (To switch in
'automatic mode, see page 27)
-s|-
4 Select the switching effect. Page 17
5 'Switch the images. ~» Page 26
14