Table of Contents
Advertisement
-0z-
To change the position of the pattern
"Te image wipes in rom the center. You can change the
poston of he image using WIPE POSITION and the 110 9
buttons.
'The pattern you can use with WIPE POSITION
Press WIPE POSITION to tum it on.
"The 1 to 9 buttons light up automatically.
Move the switching lever until the Inserted
Image becomes the size you want.
Move the pattern by pressing the 1 to. 9
buttons.
'To move the pattem continuously, Keep the button
pressed.
P r e s s i n g
the each button moves
the inserted
If you change the wipe pattern attor you set the position
* Ifyou select one of the pattems which can be used with
WIPE POSITION, the position does not change.
+ Ifyou select a pattern which cannot be used with WIPE
POSITION, the pattern appears at the center
Note on the pattern size
'When you tum on or off WIPE POSITION, the pattern size
chages.
Note on the position setting
you want to make the inserted image appear ata particular
position, store the position in program memory (page 43).
25
Advertisement
Table of Contents
