Table of Contents
Advertisement
-gI-
20
You can switch to another image or black screen by wiping
'out the current image. Also you can insert an image into
'another image using some of the WIPE SELECT buttons.
Bh wire
EA woe
Selecting the Wiping Pattern
Note to obtain the wiping pattern you want
another button of the WIPE SELECT section is it, turn off
the button you do not want by pressing i
you leave some buttons lit, the wiping wll be performed as
Supplementary Effect for Wiping
the combined patterns.
you press a button which cannot be combined, the pattern
'of the pressed button replaces the previously it button.
To insert a black portion between the images
Press BLACK INSERT to turn it on.
Press to turn on the button of the WIPE SELECT
section.
How the image is wiped out or inserted is shown below.
[a] You can use these buttons in combination (page 22).
{b] You can insert an image with these buttons (page 23)
—
To wipe in the same direction
( Press ONE WAY to turn it on.
To reverse the wiping direction
Press REVERSE to turn it on.
On the REVERSE function
"The wiping direction i predetermined for each of the LINE A and
LUNE
B images. When you want to wipe in the opposite direction,
press REVERSE.
Ht the wipe pattern edges or image is distorted
'The wie pattem edges oF mage may be distorted with some
monitors. (This Goes not alfet the recorded image) Tho distortion
maybe rediced by turing down he bnghrass fe manior,
4
Advertisement
Table of Contents
