Ethernet Host Interface - Bosch APC-AMC2-4R4CF Installation Manual

Access Modular Controller 2
4.8

Ethernet Host Interface

The AMC2-4R4 offers a 10/100 Mbit/s Ethernet auto-sensing interface to connect to a local
area network or host computer.
A complete connection diagram of the Ethernet host interface is shown in chapter Connecting
Diagrams, page 102.
The AMC2-4W offers a 10/100 Mbit/s Ethernet auto-sensing interface to connect to a local
area network or host computer.
Notice!
Use a CAT5 or higher version to connect the AMC2-4W with the network.
A complete connection diagram of the Ethernet host interface is shown in chapter Connecting
Diagrams, page 102.
Figure 4.30: Location of the Ethernet interface
Figure 4.31: Location of the Ethernet interface
Bosch Access Systems V.B. Installation manual
Installing | en 53
2020-01 | V02 |