Ethernet Host Interface - Bosch AMC2 Installation Manual

AMC2 Modular Controller
4.8

Ethernet Host Interface

The AMC2-4R4 offers a 10/100 Mbit/s Ethernet auto-sensing interface to connect to a local
area network or host computer.
A complete connection diagram of the Ethernet host interface is shown in chapter Connecting
Diagrams, page 44.
Figure 4.9: Location of the Ethernet interface
Notice!
After connecting a new AMC2 device to a network using DHCP, it can take some time before
the new AMC2 device is recognized by the remote server.
You can accelerate this process by running the following command:
ipconfig /flushdns
This makes the AMC2 device immediately available by its name.
Bosch Access Systems GmbH Installation Manual
Installing | en 21
2018-02 | AMC2-4R4 |