GE Amersham Imager 680 Operating Instructions Manual page 69

3
2
1
Note:
Part
1
2
3
4
5
6
Amersham Imager 680 Operating Instructions 29271308 AB
The time displayed in the Set exposure time window, is by default the exposure
time used during the last capture. The time can be set from 0.1 seconds up to
10 hours.
Function
Cancel button: Use to return to the Capture tab without saving changes.
Reset button: Use to reset the the exposure time to zero.
Time units area: Use the plus or minus buttons to increase or decrease the
exposure time by Hours, Minutes, Seconds, or 1/10 sec.
Keypad: Use the right and left arrow buttons to navigate between the
Hours, Minutes, Seconds, and 1/10 sec fields. The active field appears blue
in the time units area.
Use the numeric keys to set the time in the selected field.
Arrow buttons: Use the buttons to navigate between hours, minutes, sec-
onds, and 1/10 s in the time units area.
Set button: Use the button to save the changes made.
3 Instrument description
3.5 Instrument software description
3.5.5 Description of settings views
4
5
6
69