GE Amersham Imager 680 Operating Instructions Manual page 180

5 Operation
5.7 Save and manage image files
5.7.3 File manage options
Step
4
Rename files
Follow the instruction to rename files.
Step
1
2
3
Open files
Follow the instruction to open files.
Step
1
2
3
4
180
Action
Select the Copy button, to copy the file(s) to the desired location.
Select the Move button, to move the file(s) to the desired location.
Note:
When a file is copied, the file will remain in the original location, thus be stored
in two places.
Action
Select the file to rename.
Select the Rename button.
Result: The keypad will appear.
Use the keypad to change the name of the file. Select Done to save the
changes.
For detailed information on how to use the keypad see Keypad view, on
page 67.
Action
Select the file to open.
Select the Open button to open the file.
If desired, use the Image tools to adjust the view of the image.
For detailed information on the Image tools, see Image tools, on page 164.
When finished, select the Done button to go back to the Library tab.
Amersham Imager 680 Operating Instructions 29271308 AB