GE Amersham Imager 680 Operating Instructions Manual page 242

8 Troubleshooting
8.3 Problems with the software
If...
The Amersham Imager 680 icon has been
accidently removed from the tablet
computer.
242
Then...
Connect to the same network as
Amersham Imager 680. Open the Safari™
web browser and type in the IP address
of the instrument in the address field.
Once the instrument connect screen is
shown, add this page to the home screen
of the tablet computer by clicking on the
square with an upward arrow next to the
address field in the browser.
Tip:
If a USB dongle is used on the camera the
default IP address is 192.168.173.1
Amersham Imager 680 Operating Instructions 29271308 AB