Set Channel Names - Bosch Integrus Installation And Operation Manual

54 en | Configuration
Menu Item
4D Channel nn
NOTICE!
An asterisk (*) is shown behind the channel number when the channel in the configured
quality does not fit on the available carriers (see section 4.1.4 ).
With an optical network connected, an asterisk (*) is shown behind the input number and the
channel number when the selected input can not be routed to the selected channel, due to
the routing limitations of the hardware. The user has to browse through the inputs in order to
determine which input can be routed to the selected channel.
Without an optical network connected, an asterisk (*) is shown behind the input number and
the channel number when an optical network channel (On) is selected, or when an input is
selected that can not be routed to the selected channel due to the routing limitations of the
hardware (typically inputs 28, 29, 30 & 31 can not be routed to other carriers than carrier 7).
7.2.6

Set channel names

Each channel can be assigned a name via the Channel Names menu (4F). This can be 'Floor' or
one of 30 pre-defined ISO language names. Also up to 32 user defined names can be added.
See also example 2 in section 7.1.3 . The language in which the pre-defined names are
presented can be chosen via the Language List menu option (4E).
Menu Item
4F Ch. Names ...
4F Channel nn
IOM-INT | V1.1 | 2010.12
Options
Channel nr.:
00 ... 31
Quality:
- Disabled
* - Mono SQ
- Mono PQ
- Stereo SQ
- Stereo PQ
Source:
In 00 .. 31
On 00 .. 31
Options
Channel nr.:
00 ... 31
Language name:
* - 'Floor'
Installation and Operation manual
Description
Select which channel to configure.
Disable selected channel.
Set selected channel to mono, standard
quality.
Set selected channel to mono, premium
quality.
Set selected channel to stereo, standard
quality.
Set selected channel to stereo, premium
quality.
Select the audio input that should be
distributed on the selected channel. For
stereo signals, the input number of the left
signal (even number) should be selected.
Select the optical network channel that
should be distributed on the selected channel.
Description
Push the button to go to the sub-menu.
Select which channel to name.
Set the name for the selected channel.
Use this name for the channel that carries the
'Floor' language.
Bosch Security Systems B.V.
Integrus