Table of Contents
Advertisement
g
EV Charging Station
Optionally, the power wire can be run through the bottom of the enclosure. See page 29.
Insert the threaded portion of the conduit hub into the enclosure hole and fasten the conduit hub
using the nut. Connect ¾" conduit nipple (Installer supplied) with minimum 3" length up to 4" length to
the conduit hub.
Align the mounting bracket to the pole, ensuring the coupler opening in the bracket is centered over
the hole in the pole bracket assembly as shown in Figure 27.
Strap the pole bracket assembly to the pole by supplied ¾" by 0.030" stainless steel banding as
shown in the Figure 27.
IMPORTANT: You must use a high tension-banding tool to install bands.
GE EV Charging Station User Manual
Figure 26: Pole Mount Installation, Critical Dimension
(GE Part no: EVPMBAND)
User Manual & Installation Instructions
27 of 86
Advertisement
Table of Contents
