Canon CXDI-80C Service Manual page 115

* When mounting the AC socket cable, tie it using the cable tie from above the protective
tube at a position 10 ±3 mm from the connector with a view to preventing strain on the
cable arising from the connector becoming disconnected.
* When mounting the power cable assembly, fasten the cable to the cable clamp.
How the power cable assembly is clamped by the cable clamp
4. Repair Guide
Cable tie position:
インシュロック位置
10 ±3 mm
10±3 mm
How the cable tie for the AC socket cables is tied
How the grounding wire is routed
- 9 -