Gb/T 28181; Service; Maintenance - Bosch AUTODOME 7100i User Manual

AUTODOME 7100i
4.7.7

GB/T 28181

Enable
Select this checkbox to enable the system to use the other parameters on this page in
accordance with the GB/T 28181 national standard ("Security and protection video monitoring
network system for information transport, switch and control").
Note: This protocol is a Chinese national standard.
H.264 elementary stream
Select this checkbox to select or to enable the H.264 elementary stream.
Registration timeout
Enter a value (in milliseconds) for the registration timeout. The default is 3600.
Heartbeat timeout
Enter the value (in seconds) for the heartbeat timeout. The default is 15.
Server ID
Enter the ID of the server.
Server IP address
Enter the server IP address.
Server port
Enter the number of the server port. The default is 5060.
Device ID
Enter the ID of the device.
Device port
Enter the number of the device port. The default is 5060.
Password
Enter the appropriate password.
Alarm device ID
Enter the ID of the alarm device.
4.8

Service

4.8.1

Maintenance

Update server
The address of the update server appears in the address box.
1.
2.
Firmware
The camera functions and parameters can be updated by uploading new firmware. To do this,
the latest firmware package is transferred to the device via the network. The firmware is
installed there automatically. Thus, a camera can be serviced and updated remotely without
requiring a technician to make changes to the device on site. The latest firmware can be
obtained from your customer service center or from the download area.
Notice!
i
Potential loss of data
Bosch recommends that you save all device configurations, including IVA and calibration, on
your network before starting a firmware update.
Bosch Security Systems B.V.
Click Check to make a connection to this server.
Select the appropriate version for your camera to download the firmware from the server.
User Manual
Configuration | en 59
2022-12 | V01 | DOC