Encoder Streams - Bosch AUTODOME 7100i User Manual

32 en | Configuration
Use the slider to adjust the Gamma correction value. The higher the number, the better the
image contrast.
Intelligent Defog
Select the required Intelligent Defog option. This feature continuously adjusts image
parameters to provide the best picture possible under foggy or misty conditions.
Intelligent Defog intensity
Select the intensity level for the defog feature from the dropdown list.
Note: This field is active only when the option in Intelligent Defog is On.
Noise suppression
Adjust the balance between noise suppression in a frame over frame averaging way, at the
cost of motion blur. The higher the value the more noise is removed at the cost of more blur in
moving parts of the scene to achieve a lower bitrate and vice-versa for lower values.
The optimum for most scenes is value zero.
Noise reduction
By default, this option is On.
Noise reduction On enables temporal noise reduction, which reduces random video noise in
the picture by averaging pixels across time if the difference between them is below a
threshold. Off disables temporal noise reduction.
Use the radio buttons to turn 2D and 3D noise reduction on or off.
Select Auto to have the device adjust the 2D and 3D noise reduction level automatically.
4.4.2.3 Scene Mode Scheduler
The scene mode scheduler is used to determine which scene mode should be used during the
day and which scene mode should be used during the night.
1.
2.
3.
4.4.3

Encoder Streams

Stream prioritization
Click Default to return the profile to the factory default values.
Select which stream should be prioritized to ensure that no frames are dropped.
Coding standard
Select the maximum stream resolution as provided per stream.
Stream limits is a mandatory selection to pre-assign the maximum available resolution for each
of the four H.264/H.265 streams. If a lower resolution is selected, you will be more flexible in
streaming options on the second and third stream. The fourth JPEG stream always shows the
maximum resolution available in the camera.
Stream 1 always runs at the maximum selected resolution in stream limits. On stream 2 and 3,
you can select various downscaled resolutions.
Active profile
Active profile shows the profile that is in use and can be set differently per stream.
If no edge recording or VRM recording is active, the device switches to the Non-recording
profile.
Stream 1 always runs at maximum selected resolution in stream limits. On stream 2 and 3, you
can select various downscaled resolutions.
Non-recording profile
Select the required profile for the non-recording mode for each stream.
2022-12 | V01 | DOC
Select the mode you wish to use during the day from Marked range drop-down box.
Select the mode you wish to use during the night from Unmarked range drop-down box.
Use the two slider buttons to set the Time ranges.
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.