Date/Time - Bosch AUTODOME 7100i User Manual

16 en | Configuration
Creating a new user
To create a new user, click Add in the section below Authentication modes.
In the box User, fill in the fields:
1.
2.
3.
To edit a password
To edit a password, click the pencil icon to the right of the column Type for the appropriate
User name.
Note: Use a maximum of 19 characters. Do no use special characters.
4.1.3

Date/Time

Date format
Select the required date format from the dropdown menu.
Device date/Device time
Notice!
i
Make sure that recording is stopped before synching to the PC.
If there are multiple devices operating in your system or network, it is important to
synchronize their internal clocks. For example, it is only possible to identify and correctly
evaluate simultaneous recordings when all units are operating on the same time.
1.
2.
Note: It is important that the date/time is correct for recording. An incorrect date/time setting
could prevent correct recording.
Device time zone
Select the time zone in which the system is located.
Daylight saving time
The internal clock can switch automatically between normal and daylight saving time (DST).
The unit already contains the data for DST switch-overs for many years in advance. If the date,
time and zone have been set up correctly, a DST table is automatically created.
2022-12 | V01 | DOC
User name: Enter a name with a minimum of 5 and a maximum of 31 characters.
Group, select the appropriate authorization level:
– live is the lowest authorization level. At this level, it is only possible to view the live
video image, and switch between the different live image displays.
– user is the middle authorization level. At this level, it is possible to operate the
device and playback recordings, but configuration changes are not possible.
– service is the highest authorization level. Entering the correct password gives access
to all the functions, and allows all configuration settings to be changed.
Type, select either:
– Password for a new password.
Use a minimum of 6 and a maximum of 19 characters. The password must have
upper-case and lower-case letters, one or more numerical digits and one or more of
these special characters ! ? " # $ % ( ) { } [ ] * - = . , ; ^ _ | ~ \
Special characters such as space @ : < > ' & + are not valid.
In this case, enter the new password a second time to eliminate typing mistakes.
– Certificate for a certificate that the new user is authorized to use.
Enter the current date. Since the unit time is controlled by the internal clock, there is no
need to enter the day of the week - it is added automatically.
Enter the current time or click the Sync to PC button to copy your computer's system
time to the camera.
User Manual
AUTODOME 7100i
Bosch Security Systems B.V.