Table of Contents
Advertisement
A break is sent to the serial port while the modem is in connect state
during an reliable or normal connection (no protocol, data buffered).
Command
\K, \K2, \K4
\K1
\K3
\K5
A break is sent to the serial port while the modem is in connect state
during a direct connection (no protocol, data not buffered).
Command
\K, \K2, \K4
\K1, \K3, \K5
A break is received from the remote modem while the modem is in
connect state during a normal connection (no protocol, data buffered).
Command
\K, \K1
\K2, \K3
\K4 , \K5
Enter command mode but do not send break to the remote
modem
Empty the data buffers and send break to the remote
modem
Immediately send break to the remote modem
Send break to the remote modem in sequence with any
data received from the serial port
Immediately send break to the remote modem and enter
command mode when break is through
Immediately send break to the remote modem
Empty the data buffers and send break to the serial port
Immediately send break to the serial port
Send break to the serial port in sequence with any data
received from the remote modem
Operation
Operation
Operation
V.3400
Protocols
6-9
Advertisement
Table of Contents
