Table of Contents
Advertisement
Protocols
A transmit break command is issued while the modem is in command
state during a reliable (protocol) or normal connection (no protocol,
data buffered).
Command
\K, \K1
\K2, \K3
\K4 , \K5
Inactivity Timer \T
The \T command specifies the number of minutes the modem will stay
online without transmitting or receiving data before hanging up. When
the value is set to 0, the timer is disabled.
Command
\T
\Tn
* default
Maximum Reliable Block Size \A
The \A command sets the maximum transmit block size for MNP
connections. Use this command to force the modem to transmit smaller
blocks in an MNP connection. A smaller block size maximizes
throughput when marginal line conditions are causing errors. The
modem sends a block up to the size specified by the \A command.
Command
\A
\A1
\A2
\A3
* default
6-10
Empty data buffers and send break to the remote modem
Immediately send break to the remote modem
Send break to the remote modem in sequence with any
data received from the serial port
Disable inactivity timer *
Set inactivity to n (n=1-255) minutes
Maximum transmit block size = 64 characters
Maximum transmit block size = 128 characters
Maximum transmit block size = 192 characters
Maximum transmit block size = 256 characters *
Operation
Operation
Operation
V.3400
Advertisement
Table of Contents
