Table of Contents
Advertisement
Getting Started
Condition
Abort Disconnect
(No answer, busy signal,
no modem, etc.)
ATH
Loss of Carrier Disconnect
Receive Long Space
Disconnect
DTR Disconnect
Loss of Line Current
Cleardown
LCD Display
Train Timeout
Protocol Link
Establishment Failure
Inactivity Timeout
Protocol Retry Limit
Exceeded
Minimum DCE Speed
Security Password Failure
Security Callback
Signal Quality
Test Mode entered
Modem power is turned off.
3-4
Default 30 sec; select 1 to 255 sec
(S-register 7)
Disconnect command
Select 100 ms to 25.5 sec (S-register 10)
Disabled or select 2 sec
Disabled or select 10 ms to 2.55 sec
(S-register 25)
A disconnect method used in V.32 and V.34 mode.
When TALK/DATA is pressed, the LCD displays
DO YOU WANT TO GO TO TALK? When YES
is pressed modem hangs up, if no telephone is con-
nected or if the connected telephone is not off
hook. Pressing NO displays DO YOU WANT TO
DISCONNECT? Press YES to disconnect.
Modem fails to establish communication with
remote site. Default is 30 seconds (S-register 7)
Reliable mode only; failure to establish reliable
link
Default is 0 or disabled; select for disabled or 1 to
255 minutes (S-register 8)
12 retransmissions of the frame
A connection occurred at a rate less than minimum
Maximum password entry attempts exceeded
Security callback is enabled and a new remote con-
nection is established. The modem disconnects
and places a call to the programmed number
Leased line operation with dial backup enabled;
extended loss of carrier or 4 unsuccessful retrains
in 3 minutes cause dial backup
Certain test modes require call termination
V.3400
Description
Advertisement
Table of Contents
