Motorola V.3400 User Manual page 172

V.25 bis Autodialer
Responses:
VAL Valid command received. Transmitted on receiving an error-
free command with no transmission error such as a parity error. This
confirmation is sent before the command is executed.
INVCU Invalid command - command unknown.
Example: TRP
INVMS Invalid command - message syntax error.
Examples: PRP;1 PRP Q
INVPS Invalid command - parameter syntax error.
Examples: PRP 1; PRP 1;1 PRP 001
INVPV Invalid command - parameter value error.
Example: PRP 5
where factory default 5 is not defined for the modem.
Current modem factory options are 1 - 9.
Request List of Stored Options RLO xxx; yy
The request list of stored options command is RLO followed by an
optional 1 to 3 digit decimal address and a 1 or 2 digit decimal count.
The Options section below lists all available options with definitions,
possible settings, and default values.
Responses:
INVCU
Example: TLO 0;1
INVMS
Examples: RLO;0;1
INVPS
Examples: RLO 0;1;
11-14
Invalid command - command unknown.
Invalid command - message syntax error.
RLO Q;1
Invalid command - parameter syntax error.
RLO 0;1;4
RLO 0;001
V.3400