Table of Contents
Advertisement
114 - 899: Reserved for future use
900-902:
903:
If enabled and a test is commanded, bilateral loop is defined as follows:
Test Commanded
Loop 1
Loop 2
Loop 3
Loop 4
Loop definitions are per CCITT V.54.
904:
905:
906:
907:
908:
Not applicable
Bilateral loop
0 - Disable
1 - Enable
Default value = 0
Bilateral Loop
Loop 2
Loop 1
Loop 4
Loop 3
DTE commanded remote digital loopback
0 - Disable
1 - Enable
Default value = 0
DTE commanded local analog loopback
0 - Disable
1 - Enable
Default value = 0
Remote commanded test
0 - Disable
1 - Enable
Default value = 1
Test timer
0 - Until DTR drops
TTT - 1 to 255 sec
Default value = 0
Not applicable
V.3400
V.25 bis Autodialer
11-21
Advertisement
Table of Contents
