Sw-1714 Board - Sony AXS-R7 Service Manual

2-18.

SW-1714 Board

Preparation
1. Remove the docking module. (Refer to
2. Remove the IF-1308 board assembly. (Refer to
3. Remove the DC-181 board assembly. (Refer to
Procedure
1. Remove the screw, and then remove the SW-1714 board assembly.
2. Remove the SW-1714 board.
(1) Disconnect the harness from the connector (CN100) on the SW-1714 board.
(2) Remove the screw, and then remove the SW-1714 board.
SW-1714 board
Switch board holder (G)
3. Install the removed parts by reversing the steps of removal.
AXS-R7
"2-2. Docking Module")
"2-14. IF-1308 Board")
"2-15. DC-181 Board")
P2 x 3
P2 x 3
CN100
Harness
SW-1714 board assembly
2-37