Sony AXS-R7 Service Manual page 63

2. Disconnect the harnesses and the fine-wire coaxial cable.
(1) Pull the two harnesses through the hole of the DC-181 board.
(2) Disconnect the two harnesses from the two connectors (CN102, CN203) on the DC-181 board.
(3) Disconnect the fine-wire coaxial cable from the connector (CN101) on the DC-181 board.
Fine-wire coaxial cable
Contact (gold)
DC-181 board
3. Install the removed parts by reversing the steps of removal.
AXS-R7
Harness
CN203
Hole
CN101
Harness
CN102
2-33