Sony AXS-R7 Service Manual page 55

4. Remove the IF-1318 board.
(1) Remove the tape AS (0932).
(2) Disconnect the three harnesses from the three connectors (CN105, CN106, CN107) on the IF-1318 board.
IF-1318 board
CN105
Connecting the harnesses
Three lead wires
IF-1318 board
Note
When connecting the harness, locate each connector by the placement of leads as shown above.
5. Install the removed parts by reversing the steps of removal.
AXS-R7
Tape AS (0932)
Harness
CN107
CN106
Four lead wires
Three lead wires
Tape AS (0932)
2-25