Configuring Camera Parameters On The Neteco - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide

?.3. Configuring Camera Parameters on the NetEco

This section describes how to configure video parameters on the Parameter
Configuration page.
Prerequisites
●
●
●
●
Procedure
Step 1 Choose Monitor > Security > Camera Management from the main menu. The
Camera Management window is displayed.
Step 2 In the navigation tree on the left, click Parameter Configuration. The Parameter
Configuration page is displayed.
Step 3 Specify parameters in the right pane based on
● If not all ActiveX controls are enabled, the test connection fails after filling in
the correct parameter information and clicking Test.
● Enable ActiveX controls. For details, see
Table 9-15 Parameter description
Parameter
Server IP Address
Server Port Number
Login User
Issue 03 (2022-12-15)
You have logged in to the NetEco client.
You have the video management permission.
Use a 32-bit or 64-bit Internet Explorer 11 browser to play videos.
The OCX control has been registered.
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
Table
Registering with the OCX
Description
Indicates the IP address
of the VCN.
Indicates the port
number of the server.
NOTE
The default port number
for VCN is 9900.
Indicates the user name
for logging in to the IVS
client.
NOTE
The Admin user cannot log
in to the NetEco to
connect to the VCN.
9-15.
Plug-in.
Example
XXX.XXX.XXX.XXX
9900
Huawei123
102