Huawei FusionModule1000A20 Commissioning Manual page 104

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
4.
Step 2 Enabling camera NTP synchronization.
The camera NTP synchronization function for the server is disabled by default. The
camera NTP synchronization function needs to be enabled for the server that
connects to cameras. After the camera NTP synchronization function is enabled,
cameras will automatically time-synchronize from their access servers.
1.
2.
3.
4.
----End
Follow-up Procedure
●
Issue 03 (2022-12-15)
Figure 9-18 Configuring the server
Configure the NTP synchronization. After setting The NTP clock source
server to Yes, set the IP address of the NTP server.
NO TE
The server that connects to cameras needs to enable the camera NTP synchronization
function.
Choose Maintenance > Unified Configuration.
Select the server that the camera needs to access, set Module name to SCU
and Parameter type to System property, and click Search.
Figure 9-19 Configuring Camera NTP Synchronization
In the search results, click Edit in the row where Parameter Name is NTPIPC
and set Value to 1.
Click Save. After the camera NTP synchronization function is enabled, the
camera, after being connected to the server, will automatically time-
synchronize with the server.
The VCN automatically restarts after the IP address is modified. The restart
takes about 5 minutes. After the restart, use the new IP address to access the
VCN.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
97