Huawei FusionModule1000A20 Commissioning Manual page 107

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide
1.
2.
3.
4.
5.
6.
Step 3 Configuring a Video Recording Plan.
1.
2.
3.
4.
5.
6.
Issue 03 (2022-12-15)
NO TE
The IPC6325 camera is driven by the HWSDK protocol.
In the Quick Setup area on the VCN IVS home page, double-click Add
Camera.
Click + in the lower left corner on the Search criteria page, setting the
parameters according to the following table, and click Next.
Table 9-14 Setting search criteria
Item
Start IP Address and End IP Address
Drive
Access domain
Mount Server
NO TE
There are multiple VCNs for multiple smart modules, you are advised to evenly distribute
the cameras to each VCN.
Click Search, in each camera record, enter the user name and password in the
text boxes and click Verify. If the camera is verified successfully, select
cameras to add and click Next.
Preview live video images, click the camera in the camera list on the left, and
adjust camera parameters to optimize the image effect. Then click Next.
(Optional) Group the cameras and click Next after grouping.
Click Finish to finish adding a camera.
In the Quick Setup area on the VCN IVS home page, double-click Server
Recording Plan.
Select the camera on the Cameras list and click Next.
(Optional) Set recording parameters, and click Next.
Set recording plan parameters in the Time settings. Drag the timeline to
select the time segment for implementing video recording.
NO TE
If you set the recording plan policy is to All, you do not need to set the recording plan
time.
Click Next to complete the recording plan setting. When
status bar, the recording plan has been set successfully.
Click Finish.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
Value
IP address range
HWSDK
Select the domain that cameras
need to access
Select the server that cameras need
to access
is displayed in the
100