Scenarios For Connecting The Lan Switch; Adding The Video Management System; Configuring Vcn Server Parameters; Setting Parameters On The Vcn Webui - Huawei FusionModule1000A20 Commissioning Manual

FusionModule1000A20 Prefabricated All-in-One
Data Center
Commissioning Guide

9.3.3.4 Scenarios for Connecting the LAN Switch

9.3.3.4.1 Adding the Video Management System

● Because cameras and VCN do not support northbound and southbound isolation, the VCN
service IP address must be set to a northbound IP address.
● The camera IP address and the VCN service IP address must be in the same network
segment.
● For details about northbound IP address, see section Overview of Southbound and
Northbound Network Isolation in

?.1. Configuring VCN Server Parameters

?.1. Setting Parameters on the VCN WebUI

Context
A default IP address is configured for a VCN server before delivery. Users need to
modify the IP address based on the actual network planning.
Procedure
Step 1 Modify the IP address for the VCN.
1.
2.
3.
Issue 03 (2022-12-15)
NO TE
Configure the PC IP address and the VCN IP address in the same network
segment. Enter the OMU Portal address (default address: https://
192.168.2.101:8443) in the address bar of the Internet Explorer and press
Enter.
NO TE
– You can log in to the OMU portal using only Windows Internet Explorer 8.0 or later.
– The OMU Portal version needs to be the same as the IVS version.
On the login page, enter the user name Admin and preset password
Change_Me, and click Log In to enter the OMU Portal page. A message is
displayed upon the first login indicating that you should modify the password.
After modifying the password, keep it properly.
NO TE
If the VCN software version is V100R003 or later, the default user name is admin.
If the VCN software version is V100R002 or earlier, the default user name is Admin.
Choose Local Configuration > Server configuration, and set the service IP
address (VCN intranet IP address), NAT IP address (VCN external IP address),
time zone and time according to the site requirements.
Copyright © Huawei Digital Power Technologies Co., Ltd.
9 Commissioning Core Components
iManager NetEco 6000 Product Documentation .
96