Table of Contents
Advertisement
Outdoor unit graph area / Indoor unit graph area
„
„
Checks the specified sensor value at the graph screen as time passes.
The graph item/unit name (if set) are displayed at the top left-hand corner of the
Name
graph area.
Sets the upper limit and lower limit of Y axis arbitrarily within the limit range of each
YAxis
sensor value.
[X] button
Closes the graph. (Outdoor unit graph only)
The probe is moved to the left and right by dragging it with the mouse.
The unit status received at the past time at the probe position is reflected on the
Probe
schematic. When a past unit status is referenced, the "Auto refresh" check mark is
automatically removed.
After upper and lower limit is set, scale for the Y axis will evenly be apportioned.
Note
Therefore, the scale may slightly be different from the actual value.
Copyright© 2009-2017 Fujitsu General Limited. All rights reserved.
Probe
7(
Advertisement
Table of Contents
